Stand-operative, high performance harvester and forwarder in one. 2,8 liters CAT-engine that meets the demands according to Euro 5/Stage-V. Harvester head with up to 42cm cutting diameter. Uniquely good handling and mobility.
Conversion between harvester and forwarder takes about 20 minutes!
Weight from 5700 kg. Length 6.3 m. Width 1.94 m (500mm wheels). Height 2.85 m.
- Images etc.
Stand-operative dual machine which simply and easily converts between harvester and forwarder without compromising productivity or performance. A unique solution with removable counterweights allows the Combi to perform as well as a traditional harvester.
Spacious storage compartment houses four 20-litre containers for extra diesel, for example, or stump treatment fluid. Plus extra chains, bar and special tools.
May be transported by means of hook-lift platform. Being able to move ’two machines at one go’ makes the Combi perfect both for thinning tasks and dealing with windblows.
2,8 liters CAT-engine that meets the demands according to Euro 5/Stage-V Harvester head with up to 42cm cutting diameter and 5.5 tonne load capacity as a forwarder.
Uniquely good handling and mobility – even on sensitive ground or moorland.
Dimensions and Weight
|Weight:||From 5 700 kg.|
|Width:||1,95 m (500 mm wheels).|
|Ground clearance:||400 mm.|
Load Area (in Forwarder mode)
|Gross load:||5 500 kg.|
|Bunk area:||2 m2. Foldable load gate (for harvester mode).|
|Load bunks:||Two fixed and one extendable.|
|Folded frame in laser cut steel.|
|Casted bogie with chain drive and wheel reductions.|
|Articulated joint with slewing bearing.|
|Hydraulic frame stabilization, automatically activated.|
|Towing points, front and rear.|
|Articulated steering:||Hydraulic with double-acting cylinders.|
|Steering angle:||± 45 degrees.|
|Cylinder volume:||2,8 l.|
|Output:||55 kW (75 hk) at 2 200 rpm.|
|Torque:||300 Nm at 1 600 rpm.|
|Fuel Tank:||74 l.|
|Flow:||148 l/min at 1 700 rpm.|
|Work pressure:||195 bar.|
|Other:||Variable load sensing axial piston pump with torque limiter.|
|Crane valve with individual signal pressure limitation.|
|Common return filter handling 360 l/min.|
|Separate filters for hydrostat and work hydraulics.|
|Type:||Hydro-mechanical transmission from Bosch Rexroth separated from work hydraulics.|
|Speed:||0–20 km/h. Four gear steps.|
|Other:||2WD or 6WD. Differential lock, front and rear.|
|IQAN System (CAN-bus based) for control of all functions in the machine supported by a user-friendly touch screen. The system allows for setting of crane functions, transmission control, diesel engine and other machine functions. System offers follow-up, troubleshooting, and alarms. Software updates are possible.|
|Seat:||Ergonomically designed seat with pneumatic suspension. Individual adjustment of the seat cushion, back and lumbar support are provided.|
|Hand rests:||Adjustable for joysticks.|
|Heating/Ventilation:||Fully-automatic heating and cooling unit (ECC).|
|Safety glass:||P12 mm polycarbonate in all windows.|
|More:||Windscreen wipers and washers, front and rear.|
|Spacious cabin supported on rubber buffers.|
|Heat and sound insulated.|
|Fully hydraulic multi disc brakes in oil bath.|
|Transport and work brake.|
|Negative park brake and catastrophe brake.|
|Automatic park brake.|
|Type:||High quality crane, Cranab FC45.|
|Gross lifting torque:||45,6 kNm.|
|Gross slewing torque:||13 kNm.|
|Standard:||Log Max 928A, la light head specifically designed for thinning.|
|Max cut capacity:||420 mm.|
|Feed force:||14,6 kN|
|Full system diagnosis.|
We reserve the right to change specification without further notice. October 2020.