Ideal for stand-operative thinning, felling trunks up to 42cm, and in areas where larger machines may damage land or watercourses. Weight from 5,700 kg. Length 5 - 7 m. Width 1.94 m (500mm wheels). Height 2.85 m. 2,8 liters CAT-engine that meets the demands according to Euro 5/Stage-V.
- Properties
- Specifikation
- Images etc.
Productive stand-operative thinning harvester – even in sensitive ground and moorland.
Weighs only 5,700 kg (6,700 kg with water-filled wheels) with option of mounting caterpillar tracks on the bogie. 2,8 liters CAT-engine that meets the demands according to Euro 5/Stage-V and has sufficient power to drive a Log Max 928 harvester head with 42cm cutting capacity.
Malwa 560H and Log Max 928 – the perfect combination for high quality thinning.
Dimensions and Weight
| Weight: | From 5 700 kg. | |
| Length: | 5.7 m. | |
| Width: | 1,95 m (500 mm wheels). | |
| Height: | 2,85 m. | |
| Ground clearance: | 400 mm. |
Chassis
| Folded frame in laser cut steel. | ||
| Sturdy bogie with chain drive, slewing bearings and wheel reductions. | ||
| Articulated joint with slewing bearing. | ||
| Hydraulic frame stabilization, automatically activated. | ||
| Towing points, front and rear. | ||
| Articulated steering: | Hydraulic with double-acting cylinders. | |
| Steering angle: | ± 45 degrees. | |
Engine
| Type: |
Caterpillar C2.8, EU Stage V, U.S EPA Tier 4 Final. |
|
| Cylinder volume: | 2,8 l. | |
| Output: | 55 kW (75 hk) at 2 200 rpm. | |
| Torque: | 300 Nm vid 1 600 rpm. | |
| Fuel Tank: | 74 l. |
Work Hydraulics
| Flow: | 148 l/min at 1 700 rpm. | |
| Work pressure: | 195 bar. | |
| Other: | Variable load sensing axial piston pump with torque limiter. | |
| Crane valve with individual signal pressure limitation. | ||
| Common return filter handling 360 l/min. | ||
| Separate filters for hydrostat and work hydraulics. |
Transmission
| Type: | Hydro-mechanical transmission from Bosch Rexroth separated from work hydraulics. | |
| Speed: | 0–20 km/h. Four gear steps. | |
| Other: | 2WD or 6WD. Differential lock, front and rear. |
Electrical System
| Voltage: | 12 V. | |
| Battery: | 95 Ah. | |
| Alternator: | 120 A. | |
| IQAN System (CAN-bus based) for control of all functions in the machine supported by a user-friendly touch screen. The system allows for setting of crane functions, transmission control, diesel engine and other machine functions. System offers follow-up, troubleshooting, and alarms. Software updates are possible. | ||
Cab
| Seat: | Ergonomically designed seat with pneumatic suspension. Individual adjustment of the seat cushion, back and lumbar support are provided. | |
| Hand rests: | Adjustable for joysticks. | |
| Heating/Ventilation: | Fully-automatic heating and cooling unit (ECC). | |
| Safety glass: | P12 mm polycarbonate in all windows. | |
| More: | Windscreen wipers and washers, front and rear. | |
| Spacious cabin supported on rubber buffers. | ||
| Heat and sound insulated. | ||
| Safe entrance. |
Brakes
| Fully hydraulic multi disc brakes in oil bath. |
| Transport and work brake. |
| Negative park brake and catastrophe brake. |
| Automatic park brake. |
Crane
| Type: | Mowi P40. Reach 6,2 m. Indexator rotator. | |
| Reach: | 6,2 m. | |
| Gross lifting torque: | 37 kNm. | |
| Gross slewing torque: | 8.5 kNm. | |
| Crane tilt: | ± 20 degrees. |
Harvester Head
| Standard: | Log Max 928A, la light head specifically designed for thinning. | |
| Max cut capacity: | 420 mm. | |
| Weight: | 412 kg. | |
| Feed force: | 14,6 kN | |
| Options: | Stump treatment. | |
| Full system diagnosis. | ||
| Value bucking. | ||
| GPS, maps. |
We reserve the right to change specification without further notice. October 2020.
